Category: 

How Can I Repair PVC Pipes and Joints?

When repairing cracks in PVC pipes, a hacksaw should be used to cut six inches on either side of the cracks.
Silicone sealant in a caulk gun, which can be used to repair PVC pipes.
PVC pipe fittings.
Polyvinyl chloride pipes, or PVC pipes, are very versatile and used for a wide array of things in modern society.
Article Details
  • Written By: Malcolm Tatum
  • Edited By: Bronwyn Harris
  • Last Modified Date: 29 August 2014
  • Copyright Protected:
    2003-2014
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
"The Everlasting Storm" in Venezuela generates an estimated 1.2m lightning strikes per year.  more...

September 16 ,  1620 :  The "Mayflower" set sail for the   more...

The use of PVC pipes and joints has become commonplace around the home. As with all types of pipes, there will be opportunities arise when there will be a need to repair PVC pipes. Here are some tips on how to handle PVC repair.

One of the most common types of repairs you may have to make will be repairing cracks in PVC pipes around the house. Depending on the severity of the crack, you may be able to repair PVC pipe by applying a sealant to the cracked area. However, it is important to remember that the sealant will have to be allowed to set, which may or may not be practical. In addition, silicone solvents used on PVC pipes and joints is not meant to be used for anything other than hairline cracks, and even then not in main lines in your home, only lateral ones. Fine quality silicone sealant compounds can be purchased at home repair and hardware stores.

Ad

If the crack is on a main line in the home, or is longer than an inch, then the prudent thing to do would be to not attempt to repair PVC pipe that is cracked. Remove the cracked section and replace it with a new segment of PVC pipe. You can do this by draining the section of pipe and then cutting at least six inches on either side of the crack, using a hacksaw. The idea is to make sure you are far away enough from the visible crack to not miss any hairline cracks that could cause a problem later.

Prepare a replacement section by obtaining a length of PVC pipe the same thickness as your original pipe. Apply sealant around each end of the pipe and then add a coupling to both ends. Slide the pipe into place, taking care to apply sealant to the ends of your original piping and sliding the couplings over both the new segment and the original line, creating a sealed portion. Depending on the location, you may want to apply channel locks to each of the coupling until the sealant has cured and set in place.

To repair PVC joints, follow the same guidelines. Use the sealant for smaller cracks that are not located on main lines. But in the event that the crack is too big to be handled by sealant alone, or is found on a main line, then you will need to replace the joint altogether. Be sure to add a little sealant around the threads of the new joint as you put it in place, or you may find yourself with another repair job to handle.

Ad

More from Wisegeek

You might also Like

Discuss this Article

anon329186
Post 9

A quick fix for PVC pipes would be to use Perma-Wrap. It's sure saved me a couple times. It's fast and easy. Good luck to all of you!

anon268054
Post 7

@anon29782: Magic? Sorry, you have to dig it up or pull another pipe through it. It's a very expensive process either way.

anon102995
Post 6

A product called Aqua Welder from Extreme Adhesives in NH lets you cut a saddle from the next larger size of pipe and bond it in place either 180 or 360 degrees (2 pieces) around the break. It will fill a gap to 1/8" and is ready to use in 30 minutes! It's not yet certified for potable water so use it on irrigation, hut tubs and DWV systems only. It's around $15.00 per cartridge.

tnt1946
Post 5

pzyh: how can I remove a pvc elbow without cutting it off? Can they be heated to loosen the glue?

anon76145
Post 4

i want a suggestion for PVC repair to be attended while it is cracked and has started a water leak. In wet conditions, which type of sealant can I use?

sweeper
Post 3

How can I fix a section of pvc pipe that is on my solar heater for my pool? A section can't be taken out and where it is nothing can be wrapped around it. I need something to seal it.

anon29782
Post 2

Can anyone suggest how to seal a cracked pvc pipe that is underground? ie. a pump through sealant?

This is a return pipe on a swimming pool.

space4grace
Post 1

I'm looking for someone who can replace my stolen copper pipes at a reasonable price. Can someone please email me?

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email