How can I Waterproof Canvas?

When waterproofed properly, canvas will cause water to bead on its surface.
There are several spray-on products available to aid in the waterproofing process.
Article Details
  • Written By: Malcolm Tatum
  • Edited By: Bronwyn Harris
  • Last Modified Date: 02 November 2015
  • Copyright Protected:
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
Detroit has lost more than half its population since 1950, from about 1.8 million to fewer than 700,000 people today.  more...

December 1 ,  1943 :  US President Franklin Roosevelt, UK Prime Minister Winston Churchill, and USSR leader Joseph Stalin signed the Tehran Declaration.  more...

There are a few different ways to waterproof canvas effectively. This material actually already has some basic water-resistant qualities, and while not waterproof in its natural state, it does lend itself very well to treatments that allow the fibers to repel water instead of allowing it to gradually seep through. In addition, the waterproofing process will help to fend off mildew, which could damage the canvas over time. Building on those water-resisting properties is the quickest and easiest way to make canvas waterproof.

Using a spray-on product that contains a fluoropolymer formula will result in waterproofed canvas in no time. Apply the product evenly and allow the material to dry thoroughly. You can test how waterproof it is by hanging it on an outdoor line or tree limb and tossing a bucket of water on the canvas shell. If the water beads off, then you know the treatment worked. If not, dry off the canvas and repeat the coating process.

When using a spray-on product, make sure it does not contain silicone. The reason for this is that most canvas is at least partially made with acrylic fiber. The silicone sealant will break down the acrylic fibers, leaving the canvas more susceptible to moisture than it was before the treatment.


A petroleum-based sealant is also a good way to waterproof canvas. There are several excellent types of this form of sealant that can be applied to the canvas using a pain brush: simply spread out the canvas and apply the sealant. Allow the product to dry on the canvas, then test it with a splash of water. The canvas should allow the water to run right off.

One firm rule of thumb when using any canvas waterproofing method is to make sure you are in a well-ventilated area during the process. No matter what type of waterproofing agents you are using, there will be some fumes. If at all possible, do it outside. As added incentive, some of the substances that are used for treating the canvas could damage your floors or the finish on wooden furniture.

Keep in mind that there is no such thing as a permanent waterproof canvas coating. Over time, you will need to repeat the treatment again, if you own the canvas item long enough. Under normal conditions of wear and tear, however, you should not have to waterproof items more than once per calendar year.


You might also Like


Discuss this Article

Post 7

Will spraying a canvas print ruin it?

Post 6

What if a canvas tent fabric comes already treated from the factory using silicone? (Some of these fabrics are designed to last more than 20-plus years and recommend using a silicone treatment for water proofing).

For example, Hydra-ShieldTM, 100 percent cotton duck canvas, or 100 percent cotton with Sunforger marine-finish boat shrunk treatment.

Post 5

The Canvak treatment is definitely the best I've seen. It seems to restore the look and feel of canvas and certainly water proofs as well as giving mildew resistance. It's easy to apply with a garden sprayer and also very durable. --Pete

Post 4

Fluoropolymers are toxic and can cause respiratory illness. In fact in Canada they are banned. Please find a natural way to waterproof your canvas.

Post 3

Where can you buy these fluropolymer sealers? What brand names are available?

Post 1

Need suggestion for "waterproofing" an existing in-place awning 12' x 16' that is only main house roof accessible to spray or roll apply.

The awning is 4 years old, never taken down and beginning to spring a few leaks.

What fluoropolymer product do you recommend and how is it packaged, applied, and purchased?


Post your comments

Post Anonymously


forgot password?