Category: 

What Are Lag Bolts?

Stainless steel lag bolts.
Lag bolts, which have coarse threading and a hexagonal head, can be used to secure wooden planks and other materials.
Article Details
  • Written By: Dorothy Distefano
  • Edited By: Michelle Arevalo
  • Last Modified Date: 14 October 2014
  • Copyright Protected:
    2003-2014
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
Sharks hunt by sensing electromagnetic fields produced by their prey.  more...

October 24 ,  1929 :  The Black Thursday crash in the US stock market took place.  more...

A lag bolt, or lag screw, is a type of fastener used for making mechanical connections between two pieces of wood to ensure that they are held together securely. These bolts are often used to fasten large beams and posts used for decking, wooden bridges, and other wooden structures. They can also be used in concrete, but require a special insert, called a lag.

These fasteners are directly screwed into wood. They have a large head on one end and a cylindrical shaft with smooth and externally threaded parts along its length. The smooth section of the length is located directly below the head. The threaded portion contains a helical structure that allows the screw to be advanced and tightened when rotated clockwise. The thread tapers to a sharp point at its end to help engage the screw by embedding into the surface of the wood.

Lag bolts are tightened and loosened by applying torque to the head of the bolt using a tool. The head of the bolt is larger than the threaded portion to provide a positive mechanical stop and to allow a tool to be used when tightening. It also has a hexagonal shape for use with an open-end or box wrench, or ratchet.

Ad

Generally speaking, a lag bolt passes through two pieces of wood being connected to each other. The first piece of wood has a pilot, or clearance, hole that allows the bolt to freely pass through without screwing into the material. It is screwed into the second piece of wood and usually penetrates it to between one-third and one-half of its thickness.

These bolts can generate a high degree of clamping force when tightened. The mating surfaces resist the force being applied by the bolt and help to prevent the connection from loosening over time. The size selected for a particular job should be consistent with the size of the pieces of wood being connected, and the forces needed to secure the mechanical connection.

These specialized connectors are available in a variety of sizes and threads. They are manufactured using different materials for varied applications. Among the more common materials used to make them are zinc-plated and hot dipped galvanized steel — which are usually reasonably priced and provide some resistance to rust — and stainless steel and silicone bronze, for applications where high corrosion resistance is needed.

Ad

More from Wisegeek

You might also Like

Discuss this Article

Kalley
Post 2

@ emartin74 - Good question. There are different types of lag bolts that can be used depending on what you’re fastening. Zinc-plated lag bolts provide the minimum amount of against rust. Stainless steel lag bolts are highly resistant to corrosion from moisture and saltwater, so they would be good to use if you were building a deck on an oceanfront condo or house. Another type of lag bolt that can be used for this purpose is the galvanized lag bolt, which is recommended for use in coastal regions. Silicone-bronze lag bolts are also resistant to corrosion and are usually used for fastening wood timbers together.

emartin74
Post 1

Can anybody tell me what different types of lag bolts there are, and what are they used for? I'm trying to get into some DIY projects around the house and need to brush up on my bolt knowledge. Just keep it simple if you can...I'm not quite Bob Vila yet!

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email