Category: 

What Is a Balanced Modulator?

A balanced modulator usually modifies a signal in the form of an AM radio signal.
Article Details
  • Written By: Solomon Branch
  • Edited By: Allegra J. Lingo
  • Last Modified Date: 02 July 2014
  • Copyright Protected:
    2003-2014
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
The average age of a NASA engineer at the time of the Apollo missions was 28, now the average age is 47.  more...

July 29 ,  1976 :  The "Son of Sam" killed for the first time, beginning a long reign of terror on New   more...

A balanced modulator is a device that modifies a signal, usually in the form of an amplitude modulated (AM) radio signal. It takes the original signal that has both sidebands and a carrier signal, and then modulates it so that only the sideband signals come through the output modulator. This creates a balanced signal, as there is less noise because the carrier signal has been removed.

Amplitude modulation is a way for a signal to be transmitted over distances. The AM signal is originally sent with a carrier signal in the form of a wave, which is then modulated, or changed, by an audio signal that is also in the form of a wave. This produces a signal that has the original carrier signal plus two bands, one on top of the original and one on the bottom. These are referred to as sidebands and are exact copies of each other. A signal like this is called a double-sideband amplitude modulated (DSB-AM) signal.

The sidebands, because they were modified by the originating audio waveform, are the signals responsible for carrying the information that is being transmitted. Once modulated, the carrier signal doesn’t serve a real practical purpose anymore, and it only shows that a signal is being sent. It does, however, take up a larger chunk of power than the two sideband signals, and also creates a less-clear signal.

Ad

To remedy, or modulate, this situation, a balanced modulator would be used. This device removes or suppresses the carrier signal, so that only the two sideband signals remain. The signal that remains now has several times more power because the carrier signal is not there to drain it away. This type of signal is referred to as double-sideband suppressed-carrier (DSBSC). In addition to being more powerful, the signal is also “cleaner,” as it has less signal noise, which the carrier signal can often create.

At some point, a DSBSC signal needs to have its carrier signal regenerated to allow for the signal to be put back into its original form for reception. In the case of an AM signal, it allows the signal to be received on the proper frequency and be heard. This can be taken care of by a device such as a beat frequency oscillator.

Ad

Discuss this Article

anon258242
Post 2

How can an 80 nos audio and video modulator with a combiner output dBmv?

ElbowTickle
Post 1

Correct me if I'm wrong, but isn't this also called the Armstrong Phase Modulator?

I know that balanced modulators were used the most in the 1940s during World War 2. A man named Edwin Armstrong invented it in 1933 to clear up FM radio signals. I'm sure it was pretty important for its time -- considering radio was still in its golden era. The balanced modulator had problems, but it was a big step in the right direction.

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email