Category: 

What is a Circuit Board?

Circuit boards have an insulator, with threads of conductive material.
Circuit boards used in applications such as satellites have rigid copper cores that conduct heat away from sensitive components.
Used in a variety of electronics equipment, circuit boards include an insulated board, usually green fiberglass, that is fitted with electronic components.
Article Details
  • Originally Written By: Brendan McGuigan
  • Revised By: G. Wiesen
  • Edited By: L. S. Wynn
  • Last Modified Date: 16 October 2014
  • Copyright Protected:
    2003-2014
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
Waking up in the middle of the night is normal for humans.  more...

October 31 ,  1984 :  Indira Gandhi, Prime Minister of India, was assassinated.  more...

A circuit board is a piece of insulation that is threaded with conductive wires and similar components. When a power supply introduces an electrical charge to the board, it is distributed along these wires to different components in a variety of ways. This lets the board control how these components are activated and charged during the use of an electrical device. A wide range of devices include at least one circuit board, including mobile phones, computers, and digital watches.

Common Composition

Also known as Printed Circuit Boards (PCB), they consist of an insulator, usually fiberglass, with threads of conductive material acting as wires on the base of the board. The insulator may consist of one or numerous layers of material glued into a single piece. These additional layers can serve a number of purposes, including grounding the board or providing heat resistance. The threads on the surface of a circuit board are usually copper, created either by laying down individual lines mechanically or by coating the entire board in copper and stripping away excess.

Components and Design

Ad

Since the 1980s most circuit boards use surface-mounted components, which are designed with small tabs, and easily soldered into place on the board. Modern circuit board producers often perform this process by placing the cool solder mixture, and baking the entire board to melt the solder and set the components in place. Prior to the creation of surface-mount technology in the mid-1960s, manufacturers used wire to attach components to each circuit board. With the need for wire eliminated, boards have become lighter and more efficient to produce.

Special Features

A number of additional technologies may be applied to circuit boards for specialized uses. Flex boards, for example, are designed to be quite flexible, allowing placement of the circuit board in positions which would otherwise be impractical. Some companies design boards for use in satellites and spacecraft, making them with rigid copper cores that conduct heat away from sensitive components to protect them in extreme temperatures. Other manufacturers make circuit boards with an interior conductive layer to carry power to various components without extra traces or wires.

Invention and History

Although previous inventors had developed similar boards in the first decade of the 20th Century, Austrian engineer Paul Eisler created the first printed circuit boards in the mid-1930s. During World War II, the US produced them on a massive scale for use in war radios. This hardware remained primarily confined to the military sector during this period, but following the end of the war it became available for widespread commercial use.

Ad

More from Wisegeek

You might also Like

Discuss this Article

anon230833
Post 9

I am doing a project at school to make a timer. How do I put that into a short sentence?

lmorales
Post 8

@anon21896/plaid - I have looked on the internet for any alternatives to the epoxy glass and found pretty much what plaid has found. While there is a lot of study around replacing the epoxy glass, most Eco circuit boards come from just recycling old parts. If you are looking to keep this circuit board for a while or even if it's just a temporary school project, it might be worth looking into to pick up an all ready used piece of the glass. Hope that helps!

plaid
Post 7

@anon21896 - While the information win199 provided was a little general, I'm gathering that you want to make the PCB yourself from both posts, so I will go off that assumption.

Circuit boards that are "Green" or environmentally conscious-slash-friendly are coming from recycling old parts of older circuit boards. This, for now, is the closest that you are going to get to an Eco-friendly design for a PCB.

win199
Post 6

@anon21896 - There is actually a company that will build an Eco-friendly PCB for you, however a consultation is required and things can get kind of pricey... I'm not sure if you're willing to put up that kind of dough for something you could probably put together yourself or maybe -should- put together yourself...? You should peruse the internet and call up some junk yards to see what alternatives there are to the epoxy glass material in order to get a better idea of what can and can't be used. Hope that helps you some.

anon21896
Post 1

I am working on a project and need to know more about circuit boards - I am quite a novice with electronic components. My project involves generating an engineering solution with the most eco-conscious, life-cycle oriented construction. I have consulted Material Safety Data Sheets about the typical epoxy glass materials used for PCBs and they read that the material is non-biodegradable, which makes sense. However, are there more biologically friendly or deconstructable materials available to make PCBs?

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email