Internet
Fact-checked

At EasyTechJunkie, we're committed to delivering accurate, trustworthy information. Our expert-authored content is rigorously fact-checked and sourced from credible authorities. Discover how we uphold the highest standards in providing you with reliable knowledge.

Learn more...

What is a Networking Switch?

R. Kayne
R. Kayne

A networking switch is the central device in a wired or wireless local area network (LAN). It receives signals from each computer on the network via Ethernet cables in a wired network or radio waves in a wireless LAN. In both cases, the switch directs traffic across the LAN, enabling the computers to talk to each other and share resources.

All computers included in the LAN must contain a network interface card (NIC). The card assigns a unique address to the machine in which it is installed. This address is called a Medium Access Control (MAC). A wired NIC accommodates an Ethernet cable, which runs to a port on the back of the networking switch. If the NIC is wireless, the card will feature a small antenna transmits signals to the wireless switch, which also bears an antenna rather than ports. Whether wireless or wired, the switch acts as a relay, reading traffic packets as they arrive from the various machines and directing the packets to the proper MAC address.

A network switch allows connected devices on a LAN or local area network to communicate with each other.
A network switch allows connected devices on a LAN or local area network to communicate with each other.

A networking switch runs in full-duplex mode, meaning a machine on the LAN can receive and transmit data at the same time. This is much faster than a networking hub, an alternate device that serves the same purpose but operates in half-duplex mode, allowing each machine or node either to send or receive at any given time. Another key difference between a switch and a hub is that the switch sends traffic discriminately, using addresses to direct traffic packets exactly where they are supposed to go. A networking hub, on the other hand, broadcasts all traffic on the network to all nodes, relying on filters within each machine to discard packets not addressed to it. This makes networks that use a hub particularly vulnerable to "packet sniffers" or eavesdropping.

Devices connect to a switch via an ethernet cable for wired networks, or radio waves for wireless networks.
Devices connect to a switch via an ethernet cable for wired networks, or radio waves for wireless networks.

For the above reasons, a networking switch is considered superior to a networking hub, but the device is also not foolproof. It can be "tricked" into accommodating packet sniffers, but the methods used to trick the switch will leave telltale traffic signatures, unlike the passive methods that can be used on a hub. Anti-sniffing software can be installed on a switched network to detect packet sniffers.

Network switches are inexpensive devices, but the do increase in price with the number of ports featured. For those with cable modem or DSL service, a broadband router with a built-in switch and firewall can be used in lieu of a stand-alone switch.

Discussion Comments

lluviaporos

@Ana1234 - Most routers and network switches and pretty much anything electronic these days will have a manual available online if you look it up. Even if that doesn't help, you can search online for a solution to your problem. There are so many websites where people volunteer their time to help out others and they are good at explaining the solution to a problem with simple terms.

If you find one online you will even be able to interact and search for the solution together. However, the other option is to buy a new router. They aren't that expensive and getting a new one means that it will have a warranty as well, which you might find useful one day.

Ana1234
I have a broadband router with a built-in switch and it's the bane of my life. It seems to get grumpy if I have too many computers accessing it, even though it has spare ports. If I have more than three it will turn itself on and off every now and then.

I'm not sure if it does this because it's several years old and possibly out of date, or if it's something to do with the computers. Basically I 'solve' the problem by using the old "turn it on and off at the wall" solution.

Post your comments
Login:
Forgot password?
Register:
    • A network switch allows connected devices on a LAN or local area network to communicate with each other.
      By: Rob hyrons
      A network switch allows connected devices on a LAN or local area network to communicate with each other.
    • Devices connect to a switch via an ethernet cable for wired networks, or radio waves for wireless networks.
      By: sergey makarenko
      Devices connect to a switch via an ethernet cable for wired networks, or radio waves for wireless networks.
    • The networking switch acts as a relay, reading traffic packets as they arrive from the various machines and directing the packets to the proper MAC address.
      By: corund
      The networking switch acts as a relay, reading traffic packets as they arrive from the various machines and directing the packets to the proper MAC address.