Category: 

What is a Tensile Test?

Article Details
  • Written By: C. Martin
  • Edited By: Andrew Jones
  • Last Modified Date: 28 November 2016
  • Copyright Protected:
    2003-2016
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
Snake charmers get snakes to “dance” because of the movement of their flute-like instruments, not their music.  more...

December 4 ,  1945 :  The United States Senate approved of US participation in the United Nations.  more...

A tensile test, also known as a tension test, tests a material's strength. It's a mechanical test where a pulling force is applied to a material from both sides until the sample changes its shape or breaks. It's is a common and important test that provides a variety of information about the material being tested, including the elongation, yield point, tensile strength, and ultimate strength of the material. These tests are commonly performed on substances such as metals, plastics, wood, and ceramics.

The tensile strength of a sample of material describes how it reacts when tension is applied to it. By measuring the changes, engineers can determine a variety of things about the material, which is helpful in determining whether it is a suitable choice for the application they have in mind. In addition to whether a material changes in shape, a tensile test will also show a material's "ultimate strength," the maximum tensile load that the material can stand. It also uncovers the material's "yield point," which is the amount of tension that causes the sample to break or fail.

Testing systems use a number of different units of measurement. The International System of Units, or SI, recommends the use of either Pascals (Pa) or Newtons per square meter (N/m2) for describing tensile strength. In the United States, many engineers measure tensile strength in kilo-pound per square inch (KSI).

Ad

Tensile test machines have been used commercially since the late 1800s. The earliest were hand operated, but modern versions that are used commercially may incorporate computers and highly sensitive electrical components. These more advanced machines enable scientists and engineers to obtain extremely accurate measurements.

In addition to dedicated machines that test only tensile strength, there are versatile pieces of equipment called universal testing machines (UTMs). These UTMs can perform a variety of stress tests, including bending tests and compression tests, a single sample of material.

Tensile testing is vitally important in a number of industries, including mechanical engineering, structural engineering, and architecture. During the planning stage of a building project, for example, these professionals normally calculate the stresses to which a building might be subjected. To ensure a stable construction, it is then necessary to select appropriate building materials, which will be able to withstand those stresses without breaking.

Ad

You might also Like

Recommended

Discuss this Article

oopsey
Post 2

Many household items are tested this way, including the Tupperware we use every day to the carpet we walk on inside our homes. From the fabrics that make our furniture to the metal that makes our frying pans, are all tested to ensure their quality in this manner.

luv2rite
Post 1

Durex, one of the largest condom manufacturers uses tensile tests to ensure their condoms will hold up. It is funny to see how many different things can be tested using this method.

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email