Category: 

What is a Transponder?

A transponder is a device that acts as both a transmitter and responder and is used to wirelessly receive and transmit electrical signals.
A transponder key.
In aviation, transponders broadcast an aircraft's position and identity.
Transponders on commercial aircraft transmit their carrier and flight identification numbers to air traffic control centers.
Communications satellites carry transponders.
Article Details
  • Written By: J. Dellaporta
  • Edited By: Lucy Oppenheimer
  • Last Modified Date: 17 August 2014
  • Copyright Protected:
    2003-2014
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
Oprah Winfrey’s intended name was Orpah, but it was misspelled on her birth certificate.  more...

September 23 ,  1949 :  US President Harry S. Truman publicly announced the US had lost its monopoly on nuclear weapons.  more...

A transponder is an electronic device used to wirelessly receive and transmit electrical signals. Fittingly, its name is equally derived from the words "transmitter" and "responder." It was originally developed to be attached to an object that needed to be located, and some are still used in this manner today.

This device functions by receiving a signal, called an "interrogator" because it is effectively "asking" for information, then automatically conveying a radio wave at a predetermined frequency. In order to broadcast a signal on a different frequency than the one received, a frequency converter is built in. By receiving and transmitting on different frequencies, the two signals can be detected simultaneously.

The first use of a transponder was on an aircraft during World War II, as part of the Identify Friend or Foe (IFF) system. By answering secret interrogation frequencies, pilots could indicate to radar operators that they were friendly aircraft.

These devices are still common today in both military and commercial aviation. They receive a signal from the ground, and then automatically reply with an identification code for air traffic controllers, as well as altitude information. In aircraft applications, they are also configured to amplify the signal in order to make the plane more visible on radar.

Ad

They are also used to measure distance by calculating the elapsed time between the sending of the interrogator signal and the receipt of the transponder's signal. For example, sonar devices are used to mark underwater positions, calculate depth, and trace positions.

It may sound as if this is a technology that the average consumer never uses, but even if that was once the case, it no longer is. The modern commuter probably has at least one transmitter in his car, probably mounted on the windshield or dashboard. These are for roads that use electronic tolling systems that compute the amount of tolls to be paid and complete the transaction without requiring the driver to so much as lower his window. Some newer cars are also equipped with ones that operators can use to locate the vehicle in the event of an emergency. Cellular phones use a similar, albeit smaller, chip to send the phone's location if it used to call an emergency number.

Even casual television viewing often involves the use of these devices. A network can uplink its ground-based satellites to communications satellites orbiting the Earth, send multiple channels of digitally compressed video and audio to a single transponder aboard it, and local stations can then pick up the program and re-broadcast it locally by aiming the appropriate ground-based dish.

Ad

More from Wisegeek

You might also Like

Discuss this Article

anon173587
Post 9

the key has a little slot in the top open it with a small flathead screwdriver. furthermore, usually you get a user's manual with your yaris and inside is the code and number of the key, a good locksmith will cut you a new key with the chip and everything. good luck.

anon132587
Post 7

The power for the transponder in your key is actually in the car itself. The rfid chip receives the power and then is able to send back a signal. Similar to security cards for parking garages and apartment buildings and is why sometimes you will have a split second delay while it receives the power. it's possible the chip has gone bad or some how has been erased and simply needs to be reprogrammed.

anon96281
Post 6

Please let me know the companies that are producers of a 'C' band transponder.

anon70659
Post 5

my car also has that transponder key. it gave problems recently where the car wouldn't start due to an immobiliser being triggered due to a weak signal from the key, but there are no batteries to power this key? I am now using the spare key.

anon69784
Post 4

immobiliser systems are actually RFID tags. the key fob has a small one in it. It has an antenna and a small microchip. When the system in the ignition sends an rf signal the rfid tag responds. The immobiliser keeps the vehicle running after about two seconds.

anon38236
Post 3

transponders use the signal to power themselves, I think they have what's called semi-conductors inside them and they have very special properties about them, this being one

abrahamvp
Post 2

How can I convert local tv rf output to a satellite transponder frequency?

anon25348
Post 1

Hi Wisegeek Editors,

My car has an engine immobilizer system. The car's manual says that when you insert the key in the ignition switch, the transponder chip in the key's head transmits an electronic code to the vehicle.

But, the key's head doesn't seem to have any screws to put the battery in should the battery run out. Or don't transponders use batteries? If it doesn't have batteries, how does it transmit an electronic code to the vehicle? Thank you very much!

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email