Industry
Fact-checked

At AboutMechanics, we're committed to delivering accurate, trustworthy information. Our expert-authored content is rigorously fact-checked and sourced from credible authorities. Discover how we uphold the highest standards in providing you with reliable knowledge.

Learn more...

What is a Trunnion?

Mary McMahon
Mary McMahon
Mary McMahon
Mary McMahon

A trunnion is a protrusion that is utilized as a mounting point. These supports are used on a wide variety of objects and devices, and they are usually designed to be an integral part of a device for added stability and strength. Making objects with this type of integrated support can be challenging, but the superior strength and support offered are sometimes worth the extra effort. Their use is specifically referenced in the names of devices like trunnion valves and bearings, which rely on this technology to function.

Classically, trunnions are installed in pairs, one on either side of the device. One of their classic uses is in the cannon, where they are integrated into the barrel and inserted into the mounting block which holds the cannon in place. They allow the barrel to be moved up and down to assist with aiming, and the mounting block itself can be mounted on a swivel so that the cannon can be safely rotated.

A trunnion is used to help position a tank's weapon.
A trunnion is used to help position a tank's weapon.

When something is mounted on a trunnion, it can move freely along one plane, but not along any other. Rotation is permitted in the plane perpendicular to the support because it can rotate within the framework it is attached to. Some designs include ones with notches or pegs that are designed to hold an object rigidly in place, and locks are also available to prevent these supports from rotating during transit or once an object has been maneuvered into the desired position.

Trunnion.
Trunnion.

Some types of vehicle suspensions have historically used trunnions, as have antennae rigs in which some movement in one plane is desired. Certain types of saws and equipment can also be installed with ones in place to allow movement in only one direction. Because they are installed in pairs, they are generally extremely stable, and they hold a device efficiently without requiring additional fasteners and support when they are properly designed.

Ball trunnion.
Ball trunnion.

Like other mounting points, trunnions can be weak points if they are not designed properly. When they are solidly cast into a device, they tend to be very strong, whereas if they are welded, glued, or otherwise attached later, the join can become weak, causing the supports to fail. Strength can also be determined by their size, the materials they are made from, and the weight of the object they are supporting. The design must be carefully calculated to provide an adequate level of support and strength without wasting materials.

Mary McMahon
Mary McMahon

Ever since she began contributing to the site several years ago, Mary has embraced the exciting challenge of being a AboutMechanics researcher and writer. Mary has a liberal arts degree from Goddard College and spends her free time reading, cooking, and exploring the great outdoors.

Learn more...
Mary McMahon
Mary McMahon

Ever since she began contributing to the site several years ago, Mary has embraced the exciting challenge of being a AboutMechanics researcher and writer. Mary has a liberal arts degree from Goddard College and spends her free time reading, cooking, and exploring the great outdoors.

Learn more...

Discussion Comments

jholcomb

@jennythelib - You'll see them everywhere now that you know what they are! My grandfather always drove a Chevy pickup because he likes the way the tailgates in them are (or were) trunnion-mounted.

Apparently, other tailgates are mounted on hinges, like a door, and take tools and a good bit of time to remove. But a trunnion tailgate, like he had on his full-size Chevy, can be easily removed if you need to for some reason. And apparently Granddad often wanted to take his off.

jennythelib

This is my new favorite word! I've always just called those pegs or posts. You see things like sometimes in furniture or baby toys especially that you have to assemble. I see now that my baby's swing, for instance, has a trunnion mount.

Post your comments
Login:
Forgot password?
Register:
    • A trunnion is used to help position a tank's weapon.
      By: flik47
      A trunnion is used to help position a tank's weapon.
    • Trunnion.
      By: Oleg Shelomentsev
      Trunnion.
    • Ball trunnion.
      By: alex555
      Ball trunnion.