Category: 

What Is Electrocautery?

Electrocautery is common in surgery, as it provides quick cleaning of wound sites and the prevention of bacterial infection.
Electrocautery may be used to remove warts.
Electric scalpels are used in electrocauterization.
Article Details
  • Written By: Mary McMahon
  • Edited By: O. Wallace
  • Last Modified Date: 16 August 2014
  • Copyright Protected:
    2003-2014
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
The highest reliably recorded surface temperature in the world was in Death Valley at 134 F (57 C).  more...

August 20 ,  1955 :  Hundreds of people were killed in anti-French rioting in Morocco and Algeria.  more...

Electrocautery is a surgical technique that involves introducing high frequency current to a specific area of the body in order to remove unwanted tissue, seal off blood vessels, or to create a surgical incision. Many surgeons use this instruments, under the belief that this technique is cleaner, safer, and more efficient than many of the alternatives. Anyone who has watched a medical drama has probably seen electrocautery in action.

The instrument used to perform these procedures is also known as an electrocautery. It uses a very high frequency, usually upwards of 100 kHz, to ensure that the patient's nerves and muscles are not stimulated. Lower frequencies could cause twitching and cramps, which would be a serious problem. Depending on the voltage used, the tool can have varying effects on the patient's body.

Electrocautery can be used to cut through soft tissue to access a surgical site, and it can also be used to seal off bleeding blood vessels during surgery to keep the site clean and reduce blood loss. It is also used in ablation, or removal of things like warts, suspected skin cancers, and so forth.

Ad

People have been using cauterization in medical treatment for thousands of years, although early forms were crude; wounds would be sealed with brands heated in the fire, for example. One of the advantages of cauterization is that it gets wound sites clean quickly, killing off many of the bacteria that might try to move in. Recovery from surgeries where electrocautery was used can also be more rapid than recovery from conventional surgeries, and the risk of infection can be reduced.

However, there are some cautions involved when using this technique. It is important that surgeons use the equipment properly and keep it in good working order to ensure that only the area of interest is coming into contact with heat or electrical current. If electrocautery is not performed with safe equipment, the patient's body could potentially be burned elsewhere.

Sometimes, surgeons will discuss the risks and benefits of electrocautery with patients before starting a procedure. Because the procedure is becoming the norm in surgery, however, such conversations are increasingly rare. Chemical cautery, which uses caustic chemicals, may also be discussed, along with laser cautery, which utilizes a precision laser to cauterize surgical sites.

Ad

More from Wisegeek

You might also Like

Discuss this Article

anon331013
Post 7

How much is the TDS of water for Electrocautery set usages?

anon302914
Post 6

Do you know exactly when Electrocautery started? I'm doing a project on cancers and one of the new treatments is Electrocautery, so I'm researching all about it.

anon217580
Post 5

I am looking for electrocautery equipment for dental use. Please suggest which vendors makes them and if they are available in India. I am also looking for someone who can help make them in India.

Planch
Post 4

One specific kind of electrocautery is called bipolar electrocautery.

A bipolar electrocautery machine works by combining both of the electrodes -- the active and the return -- are incorporated into the same instrument.

This causes the current to pass only between the two tips of the instrument, which is often shaped like forceps.

This type of electrocautery is particularly useful in surgeries where is is important to limit the tissue damage as much as possible.

Because of the construction of the machine, the current has a much more localized impact on the surrounding tissue.

However, critics state that the bipolar electrocautery machine is much more difficult to use, and requires repeated cleaning as charred cells build up on the apparatus.

LittleMan
Post 3

One of the by-words in the electrocautery world is a "bovie".

This refers to the first electrosurgery apparatus, created by Dr. William Bovie.

Bovie electrocautery units are still commonly used today for blood coagulation, and is often simply called a "bovie" by surgeons.

FirstViolin
Post 2

@anon91839 -- The voltage and duration of the electrocautery can depend on the type of procedure, as well as the electrocautery unit used.

Even the small ones, like a cautery pen, will get up to 2300 degrees Fahrenheit.

As far as duration, I would suppose that would depend on the type and thickness of tissue that was being cauterized.

anon91839
Post 1

what temperatures and durations are used?

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email