Category: 

What Is Spalling Concrete?

Spalling concrete with pitting.
Properly poured concrete being worked.
Article Details
  • Written By: Mary McMahon
  • Edited By: O. Wallace
  • Last Modified Date: 01 April 2014
  • Copyright Protected:
    2003-2014
    Conjecture Corporation
  • Print this Article
Free Widgets for your Site/Blog
Fluorescent light bulbs use 80% less electricity and last as much as 12 times longer than conventional light bulbs.  more...

April 16 ,  1947 :  The term "Cold War" w  more...

Spalling concrete is concrete that has broken up, flaked, or become pitted. This is usually the result of a combination of poor installation and environmental factors that stress the concrete, causing it to become damaged. On a low level, it can be purely cosmetic in nature, but it can also result in structural damage, such as damage to reinforcing bars positioned inside the concrete. For this reason, it is important to address spalling when it first starts to appear.

The signs of spalling are easy to spot. The surface will become rough and flaky, and may pit. In some cases, chunks of concrete break loose from the installation. The concrete can also start to crack, especially if large chunks break off. It can be repaired by totally removing the damaged section of concrete and filling it in with cement.

The best time to address spalling is when concrete is first poured, by taking steps to prevent it from occurring in the first place. The concrete should be mixed with the right amount of water, and ideally the mix kept as dry as possible because a high water content can weaken the material. It also needs time to cure properly and should be handled carefully during curing. Sealing the concrete can also protect it from the elements. There are a number of sealants available for concrete and they can also work with a decorative finish.

Ad

If signs of deterioration are spotted in a concrete installation, it is best for the site's owner to act quickly to address them. The longer concrete is allowed to crack, pit, chip and flake, the higher the risk of serious damage. If spalling concrete is structural in nature, it may be advisable for the owner to consult a contractor or concrete professional to get advice and to perform any necessary repairs. This is especially important when damage to the concrete results in damage to bars used for reinforcement.

For decorative concrete, spalling can be a problem because it may mar the appearance of the concrete, even after the damage is repaired. It can be difficult to match things like tinted concrete and patterned concrete with a repair, since wear will have altered the appearance of the rest of the concrete. If concrete spalling appears in a decorative installation put in by someone else, it can be better to contact the contractor or company that put the concrete in and ask that they repair it.

Ad

Discuss this Article

SwiftBeats
Post 2

I once had spalling occur the day after my concrete was poured because the contractor forgot to add sealant. It snowed the next day and the entire patio was ruined. Luckily, the contractor replaced it without charging me anything, but he took a huge loss!

stoshu
Post 1

Considering that all things are equal. How long does it take for spalling to occur on a wall structure?

Post your comments

Post Anonymously

Login

username
password
forgot password?

Register

username
password
confirm
email