Category:

# What is the Difference Between a Bit and a Byte?

Computer memory.
A gigabyte can hold the information equivalent of about 1,000 thick books.
Article Details
• Written By: R. Kayne
• Edited By: O. Wallace
2003-2015
Conjecture Corporation
 Commercial airplanes typically fly more slowly than they did in the 1960s in order to conserve fuel.  more...

 July 7 ,  1928 :  Sliced bread was sold in the US for the first time.  more...
wiseGEEK Slideshows

A bit, short for binary digit, is the smallest unit of measurement used for information storage in computers. A bit is represented by a 1 or a 0 with a value of true or false, sometimes expressed as on or off. Eight bits form a single byte of information, also known as an octet. The difference between a bit and a byte is size, or the amount of information stored.

For example, it takes 8 bits (1 byte) to store a single character. The capital letter “A” is expressed digitally as 01000001. A small case “a” is represented in binary code as 01100001. Notice the third bit is different in each octet. By rearranging the bits within the octet, a byte is capable of producing 256 unique combinations to form letters, numbers, special characters and symbols.

It can get confusing keeping units of storage straight, but it can help for people to remember that the smaller word is the smaller unit of storage. This also helps people to remember the difference between greater units, such as the kilobit and kilobyte.

A kilobit is 1,000 bits, though in the binary system, it is designated as 1024 bits due to the amount of space required to store a kilobit using common operating systems and storage schemes. For simplicity, however, most people think of kilo as referring to 1,000 to more easily remember what a kilobit is. A kilobyte then, would be 1,000 bytes.

Knowing the difference between a bit and a byte helps to explain megabits, megabytes, gigabits and gigabytes. For example, 1,000 kilobits is 1 megabit, and 1,000 kilobytes is 1 megabyte. Since a bit is eight times smaller than a byte, 1 megabit is eight times smaller than 1 megabyte. Following this pattern, 1,000 megabits is 1 gigabit, and 1,000 megabytes 1 gigabyte.

Internet connection speeds are expressed in terms of data transfer rates in both directions (uploading and downloading), as bits or bytes per second. Abbreviations are, unfortunately, not standardized, making it easy for customers or potential clients to confuse a bit and a byte when trying to determine how fast something is. For example, a speed of “750 kbps” might be misinterpreted by a customer as meaning 750 kilobytes per second, or 8x faster than what the provider means.

A rule of thumb that is generally reliable is that small case abbreviations typically refer to bits, while a capital letter typically refers to bytes. Therefore, kilobits per second would be “kbps” and kilobytes would be “KBps,” or “kBps.” The same holds for megabits per second (mbps) and megabytes per second (MBps). Bits might also be expressed as “Kbit,” “Mbit,” or “Gbit.”